Custom Face Framed Cabinetry


Material Specifications

• Tops, bottoms, backs and unexposed ends – ½” thick veneer core maple plywood
• Exposed ends – ¾” thick veneer plywood with exterior face having matching wood species to frame and door
• Face frames – ¾” thick by 1 5/8” solid Red Oak, Hickory, Maple, Knotty Alder, Knotty Pine, Cherry, Birch, Rustic Cherry, Mahogany, Walnut or Quarter Sawn White Oak
• Wall cabinets – drilled to receive metal shelf clips for adjustability
• Wall shelves – ¾’ Maple veneer core plywood with banded edge. Cabinets with finished interior receive 15/16” thick solid wood shelves (unless otherwise specified)
• Base cabinets – drilled to receive metal shelf clips for adjustability
• Base shelves – ¾” Maple veneer core plywood with banded edge
                            - 15 ½” deep cabinets with finish interior receive 15/16” thick solid wood shelves (unless otherwise specified)
• Pantry and linen shelves – ¾” thick Maple veneer core plywood
                                              - 22 ½” deep cabinets are drilled to receive metal shelf clips for adjustability
• Drawer boxes – dovetailed 5/8” thick solid Maple front, back and sides. Bottoms are ¼” plywood
• Toe kick – ¾” thick plywood 45 degree mitered into all finished ends
• Drawer slides – Blum Tandem 75lbs.  Dynamic 100lb. static weight capacities. Full extension concealed drawer runner with or without Blumotion
• Hinges – Blum compact 110 degree concealed hinges, ½” standard or 1 ¼” full overlay
                  - Knife hinge with 1 3/8” reveal, ¼” overlay used on lipped doors
                  - Butt hinge (door is flush with face frame) used on inset doors


Construction Specifications
• Face frames are fastened with screws and glue. Tops and bottoms are dadoed, glued and screwed into sides of cabinet. Sides, top and bottom are glued and screwed into face frame. Raised end panels and finished plywood end panels are tongue and grooved together to face frames using clamps and glue. Doors with frames are tongue and grooved together using glue and pins.
Finish Specifications
Interiors – prefinished UV cured maple plywood
Exteriors – stained hand wiped, sealed with a catalyzed sealer, sanded, hand wiped, second coat of catalyzed sealer, sanded, hand wiped and top coated with catalyzed conversion varnish. High gloss, Semi-gloss, Satin (standard) and Flat sheens available.



© 2010 E.J. Hoffman Custom Cabinetry
346 11th Street SE, Massillon, OH 44646 | 330-575-3844   
Home  | Gallery  | Product Info  | Contact Us